Root Quencher® Garden Bed Kit
Features & Benefits
What's Included
- 4 Root Quencher® Spikes
- 17mm × 100' 12" Spacing 0.9 GPH Netafim Dripline
- 1/4" × 100' Vinyl tubing
- End Valve. 1/2" barbed for drip systems
- Hose end to 1/2" female NPT fitting
- 4 Clamp N Pierce by Raindrip. 1/4" tubing to 1/2" dripline
- 10 Dripline Staples
- 1/2" to Barbed connector
Best Use For
Root Quencher® Garden Bed Kit
The Garden Bed Kit delivers everything you need to water smarter and grow healthier plants right out of the box. Ideal for raised beds, potted plants, and first-time gardeners, this all-in-one system covers up to an 8’ x 8’ area and sets up in minutes.
No guesswork, no water waste, just stronger roots,
healthier plants, and a thriving garden made easy.
Installing Your Root Quencher® Garden Bed Kit
(6’ X 6’ SETUP)
To demonstrate how easy it is to get started,
we installed a 6’ x 6’ garden using the full kit.
The setup is quick and straightforward.
Follow along and see how simple it is to build a
smarter watering system from the ground up.
Connect to Water
Attach hose-end adapter to your outdoor hose or bib.
Wrap the Threads
Use Tefl on tape for a water-tight seal.
Connect the Fittings
Screw in the barbed connector until snug.
Lay the Flex Line
Use the 25’ hose to spiral across the bed.
Secure the Line
Staple the hose into the soil
to hold shape.
Install the Spikes
Place Spikes over the line and press down.
Test the Setup
Turn on water slowly to check for fl ow or leaks.
Adjust the Flow
Twist the Spike to set your water level.
You’re Ready to Grow!
Bed is irrigated and ready in 15 minutes.
Want to Automate?
Add a Rachio Hose-end Timer for hands-free scheduled irrigation. It connectsdirectly to your hose bib and syncs withyour smartphone for easy control.
Upgrade Your System
See how easy it is to upgrade your setup by adding a Root Quencher®
Option 1: Add a Root Quencher
We added a Root Quencher to an Avocado tree by placing it about 24 inches deep into the root zone.
After digging a hole with a hand trowel, we set the Root Quencher in place and connected it to the drip line. It’s a quick and efficient way to enhance your watering setup.
Click HERE for full Root Quencher installation instructions.
Option 2: Tap Into an Existing Sprinkler Line
We removed a bubbler from the garden bed, adde a fitting, and connected drip lines. This setup ties into the main sprinkler system, so there’s no need for a separate timer. Just like that, the upgrade is complete and ready to go.
Click HERE for full Root Quencher installation instructions.